maturity-method-cover-image

Maturity Method for In-Place Strength Measurement

In this article, we will investigate the use of maturity method for in-place strength measurement. We will review the concept behind the maturity technique, and the most common practices. Later, we will describe the benefits and limitations of this method for in-place strength prediction. In the last part

Read More

Non-Destructive Evaluation of Unknown Foundations

Non-destructive evaluation of unknown foundations and piles has gained interest among engineers and researcher over the past few years. Latest research show the effectiveness of these methods in investigating the depth and quality of existing piles, as well as in the quality assurance of new construction. Piles

Read More
compressive_strength_of_concrete

How to Evaluate Compressive Strength of Concrete

What is the best method for the measurement of compressive strength of concrete? Testing cylinders and cubes in compression is the most convenient and well-known method for measuring the strength. The main question is if one can design and develop a method that can measure the strength

Read More
Structural Health Monitoring

Smart Structural Health Monitoring

I would like to start this by a very simple example: that infrastructure facilities work very similar our body. When they are first built (i.e. like when we are at our young age), they operate at their best. Just a routine checkup is all you need to

Read More
NDT Techniques

5 NDT Methods for Structural Evaluation

NDT methods can be used in routine inspection projects; they can be used to follow up the state of damages in periodical checks. The other advantage of NDT methods is that they can be performed by minimum intervention to the structure. This helps prevent aggravating the problems

Read More
inspection and evaluation of sructures

Ontario Structure Inspection Manual

Ontario Structure Inspection Manual The Ontario Structure Inspection Manual has been used for bridge inspections in Ontario since 1985. The manual underwent significant modifications in the year 2000 (OSIM, 2008). This FAQ provides general definitions and terminology used in the OSIM 2008.  

Read More
DETERIORATION OF CONCRETE

Deterioration of Concrete Structures

Deterioration of reinforced concrete structures can happen for a number of reasons. Physical and Chemical processes can impact durability and structural performance of the concrete. Defects in design, materials, workmanship, curing and maintenance can all impact the service life, safety and reliability of an element. In this

Read More
Damaged Bridges

How to Test Damaged Bridges?

Damaged Bridges are a major concern in the maintenance and operation of transportation infrastructure. Bridge structures in North America were mainly developed in the 1960’s and 1970’s and are rapidly approaching the end of their initial service life. Major mega cities in North America spend millions of dollars

Read More
Structural Effects of Corrosion

Structural Effects of Corrosion

Corrosion of steel reinforcement is often investigated in the context of the durability performance of the structure; however, corrosion can equally impact the structural performance. Steel corrosion may result in reduced flexural capacity (loss of rebar cross section), reduced bond, and limited ductility. In this article, we

Read More
Patch Repair

Patch Repair: Dos and Don’ts

What happens when the patch repair is only done in damaged area?  When a corrosion sign and rust stain appear on the concrete surface, it is the time to do something in order to stop corrosion propagation. Depending on corrosion type and propagation, the required intervention and

Read More